How to Download and Install USB VID_17A1&PID_0128 Driver for Windows 7
If you have a USB webcam with the hardware ID USB\\VID_17A1&PID_0128, you may be looking for a driver to make it work on your Windows 7 computer. Unfortunately, this device is not supported by the official manufacturer, and there is no official driver available for download. However, there are some unofficial solutions that may help you get your webcam working.
usb vid 17a1 pid 0128 rev 0100 driver download win7
Download File: https://www.google.com/url?q=https%3A%2F%2Ffancli.com%2F2tGPZa&sa=D&sntz=1&usg=AOvVaw1ZUn2TFeQoYQ2J3LJfdGdc
One possible solution is to use a generic UVC (USB Video Class) driver that is compatible with most USB webcams. UVC drivers are built-in to Windows 7 and newer versions of Windows, so you don't need to download or install anything. However, some UVC drivers may not work well with your webcam, or may not support all the features of your webcam. To try this solution, follow these steps:
Plug in your USB webcam to your computer.
Open Device Manager by clicking Start, typing device manager, and pressing Enter.
Find your USB webcam under Imaging devices or Other devices. It may have a yellow exclamation mark or a generic name like USB Camera or Unknown Device.
Right-click on your USB webcam and select Update Driver Software.
Select Browse my computer for driver software.
Select Let me pick from a list of device drivers on my computer.
Select USB Video Device from the list and click Next.
Wait for the driver installation to finish and click Close.
Open your webcam software or any application that uses your webcam and check if it works.
If this solution does not work for you, or if you want to use a more specific driver for your webcam, you can try another solution. This solution involves downloading and installing an unofficial driver that was created by a third-party developer. This driver is based on the UVC 1.0.2.0 Camera Driver for Windows XP/Vista/7/8/8.1/10 (x86) [^2^], but it has been modified to support the USB VID_17A1&PID_0128 device. To try this solution, follow these steps:
Download the unofficial driver from this link: http://download.webcamtests.com/drivers/vendors/UVC/1-0-2-0/Windows-x86.zip [^2^].
Extract the zip file to a folder on your computer.
Plug in your USB webcam to your computer.
Open Device Manager by clicking Start, typing device manager, and pressing Enter.
Find your USB webcam under Imaging devices or Other devices. It may have a yellow exclamation mark or a generic name like USB Camera or Unknown Device.
Right-click on your USB webcam and select Update Driver Software.
Select Browse my computer for driver software.
Select Browse and navigate to the folder where you extracted the zip file.
Make sure Include subfolders is checked and click Next.
Wait for the driver installation to finish and click Close.
Open your webcam software or any application that uses your webcam and check if it works.
Note: This unofficial driver is not endorsed by the manufacturer of your webcam or by Microsoft. Use it at your own risk. The developer of this driver is not responsible for any damage or loss that may occur from using this driver. You should always backup your system before installing any new drivers.
We hope this article helped you download and install USB VID_17A1&PID_0128 driver for Windows 7. If you have any questions or feedback, please leave a comment below. 0efd9a6b88